Divine Noise 50/50 9m ST-RA White

Divine Noise 50/50 is a handmade instrument cable combining the flexibility of a coil with a straight section that runs along the floor. This ST-RA version has one straight and one right-angle 6.35 mm G&H plug for connecting a guitar to an amplifier or pedalboard.

Oxygen-free copper, low capacitance and 95% shield coverage provide a construction designed for clear signal transfer and effective interference rejection. The heavy-duty PVC jacket and hand-soldered connections are built for regular use.

Coiled near the instrument, straight towards the rig

The 50/50 construction combines a flexible coiled section with a straight section that runs onwards to a pedalboard or amplifier. It suits players who want the feel of a coil near the guitar and an easier-to-route cable along the floor.

ST-RA identifies the connector combination: one straight and one right-angle G&H plug. Choose which end goes into the instrument according to its jack placement and your preferred cable route. Both are conventional 6.35mm mono/TS connectors.

The heavy PVC jacket, copper shield and semi-conductive PVC layer form a construction designed for repeated handling while controlling interference and handling noise. The cables are handmade in the USA, with connections soldered using silver solder.

Specifications

• Configuration: 50/50, coiled and straight sections
• Colour: white
• Nominal cable length: approximately 9 m (30 ft)
• Sections: 22 ft coiled and 8 ft straight
• Connectors: G&H, 1 × straight and 1 × right-angle 6.35 mm mono (TS)
• Conductor: stranded oxygen-free copper, 20 AWG
• Copper spiral shield: 95% coverage
• Capacitance: 30 pF/ft
• Outer diameter: approximately 7.1 mm
• Semi-conductive PVC layer to reduce handling noise
• Hand-soldered with silver solder and made in the USA
• Manufacturer's lifetime warranty

The stated length refers to the total cable material. The coiled section's 22 ft is measured before winding, so the cable is shorter when relaxed.