Zvex Vexter Woolly Mammoth - tgt11
Hem » Pedaler » Bas pedaler » Produkt

Zvex Vexter Woolly Mammoth

2795,00 :-
Lagerstatus: I lager
SNABB SERVICE vi skickar samma dag om ordern är lagd innan kl 13:00 CET
45 DAGAR FULL RETURRÄTT byt eller pengarna tillbaka

Sensitive and touchy, this bass fuzz has tremendous bottom end and a beautiful harmonic structure that sounds blistering with a guitar too. 


OUTPUT: Designed for smooth repeatable level settings. 

EQ: Tilts the spectral re- sponce, turning to the left adds lows and softens the highs, then mids, and finally reduces lows. 

PINCH: The harmonic struc- ture can be controled with this knob. It adjusts the
pulse width of the waveform. 

WOOL: Adjusts the amount of fur around the note. 


In the leftmost position, the waveshape is quite symmetri- cal which produces a smooth creamy sound. Turning it up slightly introduces lovely intermodulation distortion. Turn- ing it clockwise narrows the waveshape into asymmetrical pulses, making the tone reedier and brassier. This also introduces an unusually smooth ‘gating’ action, which gives you an absolutely eerie silence between notes. 

At most settings you will notice that low frequency pressure is preserved. This circut has a frequency response that con- tinues several octaves below audibility. The subs will knock everything off your amps, so put the bottles on the floor. No kidding. 

Oh! And the circut (designed by Chuck Zwicky) draws less than one-half of a milliampere (0.0004 amps, typical). That
is less than one-hundredth the current consumption of most ‘commercial’ pedals, giving this pedal as high a battery life
as you can find anywhere. In fact, if you use an alkaline bat- tery and always unplug the input cord between sessions, you may never have to change it at all. 

In our continuing effort to be friendly towards the earth, the universe and it’s inhabitants; no animals were harmed dur- ing the making of this pedal. 


All Z.Vex pedals use 9V DC power supply with (–) polarity on the middle pin (typical BossTM power supply). Using the incorrect supply may damage your pedal. 



Läs mer