Lusithand Devices Alma Comp MKII - tgt11 - tgt11

Lusithand Devices Alma Comp MKII

3595 :-
Slut i lager

Ange din e-postadress för att bevaka denna artikel. Du blir meddelad när artikeln åter är i lager.

Lagerstatus: Ej i lager
FRI FRAKT FRI FRAKT PÅ DENNA PRODUKT
SNABB SERVICE
Vi skickar samma dag om ordern är lagd innan kl 12:00 CET

14 DAGAR FULL RETURRÄTT
Byt eller pengarna tillbaka

The new version of the Alma Compressor takes your tone further… to a place where you can actually hear it!

The compressor can work on three different compression ratio’s and, together with its EQZ control, you’ll struggle to get a bad sound out of it.

To top it all off, it has a decent amount of Boost to beef up your sound.

The Alma Compressor MKII is an evolution of it’s predecessor; it retains all its original elements such as an internal voltage doubling circuit, and a Clean control to be blended with the compressed signal.

As a highlight, the new features of the MKII are a Ratio switch, allowing the user to select between 2:1, 4:1 and 8:1 compression Ratios, as well as a visual indication of how much compression is being applied to the input signal.

An internal voltage doubler increases the voltage being fed. This makes it possible to have 36v of internal running operation, when powering from an 18v supply, increasing headroom and preventing unwanted clipping/distortion from a hotter signal.

The Clean buffered control, when mixed with the compressed signal, allows for parallel compression which can help bring some clarity back to your playing.

The EQZ is a Tilt Equalizer which together with the SHIFT EQZ allows to gently (and musically) compensate for different sounding instruments.

The Alma Compressor MKII is a great tool to help improve your tone while keeping everything together. It has superb clean sound, very low noise and it allows for a decent amount of boost on top of everything.

Superb clean sound
Easy and simple operation
Low noise
Clean blend/ Parallel compression
Top Mounted Jacks
36v operation (internal)
Visual compression indicator
EQZ tilt control for tone sculpturing
2:1/ 4:1/ 8:1 selectable compression ratio’s
Voltage Operation

9 to 18v Dc (Centre Negative)

Current draw:
9v (+-18v internal)= 37mA
18v (+-36v internal)= 59mA

Controls

  • CLN= Clean signal
  • COM= Compression/Gain level
  • VOLcom= Comp volume
  • EQZ= Tilt equalizer
  • SHIFT EQZ= shifts between 900 Hz and 250Hz tilt point RATIO S.= 2:1/ 4:1/ 8:1 compression ratio’s

 

Läs mer


We've selected shipping to

SVERIGE

[Change country below]