Karma Machine Shop

Everyone loves our MTN-10 and ODR-10 pedals – the most authentic and accurate clones of the Ibanez MT-10 and Nobels ODR-1 out there.

Many have discovered the magic in stacking them. Machine Shop goes beyond that.

After a year of development we are proud to present the Karma Machine Shop!

ODR & MTN circuits – Stacked (series) or Blended (parallel)
STACK mode – choose the order of the circuits
BLEND mode – circuits are mixed together for ultimate flexibility
Dry signal – mix in part of your clean sound (BLEND mode with either side bypassed)
HOLD FOR BOOST function with variable gain control
Pure analog audio signal path and true bypass
Programmable power-up

ODR Side

Drive – amount of overdrive
Level – output level of ODR circuit
Spectre – tone control
ODR Footswitch – True bypass when off
Back panel top left to right

Output jack – to amp or other pedals
9-18V DC – Power jack, center negative (Boss style)
Input jack – instrument plugs in here
BOOST VOL – controls the amount of output boost applied when Master Bypass/Hold for Boost footswitch is activated

Master Bypass/Hold For Boost

Click for Master Bypass of entire pedal
Hold briefly to engage overall output boost
Boost level set by Boost Vol control upper right
Master (orange) LED will blink on/off
Boost can be active even with pedal bypassed (LED will blink dimly)

MTN Side

Drive – amount of overdrive
Vol – output level of MTN circuit
B/M/T – Bass/Mids/Treble controls
MTN Footswitch – True bypass when off
Setting the Power-Up State

Set the on/off state of all foot switches on power-up:
With power applied, hold down both ODR and MTN foot switches until LEDs blink on/off a few times
Set on/off state of ODR/MTN/Master Bypass to your preference
Hold down both ODR and MTN foot switches to exit programming mode. (LEDs will blink on/off to let you know)

STACK MODE:

Pedal circuits in series, one after the other
The lower STACK ORDER switch sets which pedal is 1st in the stack
Set the upper slide switch to the left

BLEND MODE:

Input goes equally to both circuits, mixed together in a ratio determined by the BLEND control.
Turn to the left for more ODR, to the right for MTN.
Set the (upper) BLEND/STACK switch to the right.
The STACK ORDER switch is out of the circuit.