GigRig HumDinger - tgt11

GigRig HumDinger

1395 :-
Slut i lager

Ange din e-postadress för att bevaka denna artikel. Du blir meddelad när artikeln åter är i lager.

Lagerstatus: Ej i lager
FRI FRAKT FRI FRAKT PÅ DENNA PRODUKT
SNABB SERVICE vi skickar samma dag om ordern är lagd innan kl 13:00 CET
14 DAGAR FULL RETURRÄTT byt eller pengarna tillbaka

Split your signal, correct phase & kill hum.

Great for DI, reamping, wet/dry and plenty more besides.

The Humdinger was designed to eliminate earth loops in audio equipment by isolating the second output with a high quality audio transformer. Earth loops are a common complaint. As soon as the ground on your gear has more than one main route to earth, you have the potential for an earth loop. The best and safest way to get rid of an earth loop is to isolate the ground that is causing the hum.

Using the Humdinger to get rid of earth loops is easy. If you use 2 amps all you need to do is stick the HumDinger at the end of your effects chain. Your main (buffered) output goes to one amp and the isolated output goes to the other. Your earth is consistent through the main output but isolated through the isolated output.

Using a mains powered effects pedal, simply place the HumDinger in the chain after the mains powered effect. The Mains powered effect is your main ground and the ground from the amp is isolated.

Technical

POWER - 9V / 100mA
CURRENT DRAW - 100mA
OUTPUTS - 1 x buffered, 1 x transformer isolated/phase reversible
DIMENSIONS - 5.2cm x 2.6cm x 10.2cm / 20.5" x 1.02" x 4.02"
WEIGHT - 0.25kg / 0.6lbs

Läs mer

We've selected shipping to

SVERIGE

[Change country below]