Fairfield Circuitry The Barbershop V2 OD

FAIRFIELD CIRCUITRY - The Barbershop Millenium Overdrive:

"Have you ever sat in a barber's chair wishing your tone was as slick as your freshly shaved upper lip? With the Barbershop Overdrive on your pedalboard, you could keep your moustache and sound good doing it.

Less is more with this simple, original design. Handmade from JFETs matched to specs, this versatile pedal will treat your pickups with the respect they deserve. In return, they’ll thank you with some of them sweet tones."

SAG
The Sag control reduces the voltage to the amplifiers as you turn it counter clockwise, giving additional control over the character and feel of the saturation. The lower the Sag, the browner the sound. Full voltage is applied when the control is set fully clockwise. It is at this setting that the pedal has the potential to be its cleanest and loudest.

DRIVE
Sets the interstage gain of the amplifiers. More gain means more distortion. The wide op- erating range allows you to go from an almost clean gain to a tasty rich overdrive.

TONE
A 3-position switch allows
to select between different flavours of high cut. In the middle, there is no cut, like the classic Barbershop of days passed. To the right, a sub-
tle high cut to tame ever so slightly the feeling of bright- ness accompanied with the Barbershop. To the left, a more extreme cut for those times when you want to delve into your dark side.

VOLUME
Controls the output volume of the pedal while keeping the effect unchanged. This is where you have plenty of room to boost.

NOTES ON POWERING
The Barbershop Millenium Overdrive was designed to operate using your typical centre negative, regulated 9-9.6 VDC power supply. The pedal is protected against reversed polarity. The pedal will function with voltages up to 18 VDC but the char- acter of pedal will drastically change. The higher the voltage, the less drive you will have. Always check your power supply for proper voltage and polarity before connecting. There is no battery connection inside the pedal.