Cooper FX Outward - tgt11

Cooper FX Outward

3595 :-
Slut i lager

Ange din e-postadress för att bevaka denna artikel. Du blir meddelad när artikeln åter är i lager.

Lagerstatus: Ej i lager
FRI FRAKT FRI FRAKT PÅ DENNA PRODUKT
SNABB SERVICE vi skickar samma dag om ordern är lagd innan kl 13:00 CET
14 DAGAR FULL RETURRÄTT byt eller pengarna tillbaka

The Outward is a digital sampling device that records audio and plays it back in different ways, depending on the mode. With freezing, stutter, and time stretching effects, there’s a lot the Outward is capable of.

  • CLOCK: Adjusts the speed at which the DSP chip runs, ranging from 10kHz (CCW) to 60 kHz (CW). When CCW, the sampling time will be extended, but will be noisier and of lower audio quality.

  • CLOCK ALT: Snaps the clock to fifths and octaves. Turn the alt control all the way CCW to have no quantization, turn past noon to enable the clock to snap to fifths and octaves.

  • TONE: Low pass filter control, useful for cutting down on noise resulting from decreasing the CLOCK control, and in taming the harshness of the digital signal.

  • FRZ|TAP: Can be used to lock the recorded sample into the buffer, preventing it from being overwritten, as well as being used to tap in a tempo. Note, the tap control does not apply to every mode. To initiate tap, press the footswitch at least twice. To override the tap control, simply adjust the knob the tap control is affecting (ie, to turn off tap on SPD but not the SIZE, turn the SPD knob and not the SIZE knob).
    The FRZ function is both latching and momentary. If you do a quick press on the button, the FRZ will be latching. Hold the footswitch (>1/2 second) and you will have the FRZ control be momentary.

  • BYPASS: Relay true bypass control. Can either be momentary or latching, depending on how long the switch is held. Hold for >1/2 second to use it as momentary. Tap it quickly to have the control be latching.

  • RST BUTTON: quickly press to scroll up through modes. Preset selection/loading will be entered by holding the button until the push buttons begin to blink in unison.

  • ALT BUTTON: quickly press to scroll down through the modes. To enter the alt control mode, hold the alt button, wait for the corresponding mode LED to begin flashing, then adjust desired knob’s secondary control.
Läs mer


We've selected shipping to

SVERIGE

[Change country below]